iLive ISP209B - Manual (Page 6)

6
Playing a docked iPod or iPhone
Docking an iPod or iPhone
Step 1:
Locate the numbered bracket that fits the iPod or iPhone that will be
docked.
• Each included bracket has a number on it, indicating which iPod
or iPhone model that bracket is compatible with. See the separate
bracket chart page toidentify which bracket is needed.
Step 2:
Snap the bracket into place over the iPod/iPhone connector in the
docking station.
• All brackets will only fit one way onto the dock.
Step 3:
Connect the iPod or iPhone to the iPod/iPhone connector inside the
docking station.
• Once an iPod or iPhone is connected to the docking station, the unit
will amplify and charge the docked iPod or iPhone.
• If the unit is running on battery power, it will not charge a docked
iPod or iPhone.
Step 1:
Dock an iPod or iPhone into the docking station.
Step 2:
Press the Power/Alarm Off Button to turn the unit on.
Step 3:
Adjust the Source Button to switch to iPod Mode.
Step 4:
Press the Play/Pause Button to play or pause the docked iPod.
Setting the Time
Step 1:
Press the Power/Alarm Off Button to turn the unit off.
Step 2:
Press and hold the Time/Menu Button.
Step 3:
While holding the Time/Menu Button, press the Up/Hour & Down/
Minute Buttons to adjust the hour and minute.
Step 4:
Release the Time/Menu Button to set the adjusted time.