Insignia NS-32E570A11 - Manual (Page 41)

37
Insignia 32" LED-LCD HDTV, 1080p
www.insigniaproducts.com
Remote control
General
Specifications
Design specifications are subject to change without
notice. Dimensions and weight specifications are
approximate.
Good picture, but no sound.
• Increase the volume.
• Press MUTE to make sure that the sound is not
turned off.
• Make sure that the audio mode is set to STEREO
or MONO. For more information, see “Selecting
the audio mode” on page 19.
• Make sure that headphones are not connected to
your TV. When headphones are connected,
sound from the TV speakers is muted.
Audio noise or static.
• Move radio frequency equipment, such as cell
phones, away from your TV.
Problem Solution
Remote control does not
work.
• Make sure that the remote control batteries are
installed correctly. For more information, see
“Installing remote control batteries” on page 7.
• Replace the remote control batteries. For more
information, see “Installing remote control
batteries” on page 7.
• Make sure that the power cord is plugged into a
working power outlet.
Remote control does not
control connected HDMI
devices.
• Make sure that the INlink Control option is set to
On. See “Using INlink” on page 31.
• Make sure that the HDMI CEC control is turned on
for the connected device.
• Make sure that the connected HDMI device is
CEC-compatible.
Problem Solution
Cannot turn to one or more
channels.
• The program may be blocked by parental
controls. For more information, see “Blocking
unrated TV” on page 24 or “Setting parental
control levels” on page 25.
• The control buttons on the front of your TV may
be locked. For more information, see “Locking
control buttons” on page 23.
• The channel may have been deleted from the
channel list. You can still tune to the channel
using the number buttons. For more
information, see “Selecting a channel” on
page 16. You can also add the channel to the
channel list. For more information, see “Hiding
channels” on page 20.
Password is lost.
• On the Parental Controls menu, enter 9999 as
the password, then set a new password. For
more information, see “Setting or changing the
password” on page 23.
Cannot access some settings
or options.
• If a setting or option is grayed out, it is not
available in the current mode.
TV cabinet creaks.
• When you are using your TV, the temperature
inside the cabinet increases. This causes the
cabinet to creak. This is not a malfunction.
Buttons do not work.
• Unplug the power cord, wait a few seconds, then
plug the power cord back in and turn on your TV.
Problem Solution
TV type LED-LCD
TV panel 31.5-inch TFT LCD
Channels VFH: 2 - 13
UHF: 14 - 69
CATV: 1 - 125
CADTV: 1 - 135
DTV: 2 - 69
Audio multiplex BTSC system
Audio output 8W × 2
Power requirement AC 120 V, 60 Hz
Power consumption
Operating: 120W
Standby: 0.6W
Dimensions 7 Ч 30.7 Ч 22 inches
(179 Ч 779.5 Ч 557.5 mm)
Weight 20.7 lbs. (9.4 kg)
Input terminals Component video/left and right audio (1)
HDMI/DVI (4)
VGA/audio (1)
Antenna (1)
USB (1)
Output terminals Headphone jack (1)
Digital audio(1)