Menu(timer, control), Menu(display), Timer(set auto power off) control – iRiver iMP-400 User Manual

Page 13: Display

Advertising
background image

Menu(Timer, Control)

STOP POWER OFF
: Automatically power off at stop mode.

(1~60 minutes)

Use or

button to adjust time.

This function only works for CD.

FF/RW SCAN
ON : Long click of or

button for fast

scan within the track.
Short click of or

button for

next or previous track.

OFF: Fast Scan through songs in a folder.

As typical with MP3 files, particularly VBR (Variable
Bit Rate) files, fast scan may not be as smooth as
conventional audio CD.

SLEEP POWER OFF
: Automatically power off after fixed time
(Time range can be set from 0 to 99 minutes).

By using button, You can select beep sound
to ON or OFF.

Use or button to adjust time.

This function works in both CD and FM modes.
When the power is off, the sleep power off setting goes back to Zero setting.

TIMER(Set Auto Power Off)

CONTROL

- 24 -

BATTERY INDICATOR
Adjust level of battery indicator.
If select lower number, the level of battery
indicator is higher. And if select higher number,
the level of battery indicator is lower.

Menu(Display)

LCD CONTRAST
: Adjust LCD contrast of remote control.

Contrast can be adjusted by using

and

buttons.

VISUALIZATION
: Visualize audio signal at play mode.

LEVEL METER

WAVEFORM

TAG INFORMATION
ON : Displays track with ID3 tag information or
with lyrics if there are lyrics.
OFF : Displays track with file name.
When you set off the tag information, the track is
played and the next track can be displayed with
ID3 tag information.
CAPTION OFF : You can turn off lyric display of synchronized MP3.
After clicking ENTER button, the displayed tag information preference can be
by using or button.

BACK-LIGHT(SEC)
BUTTON : Backlight is on.
ADAPTER : If the adapter is connected,
backlight is always on and if the adapter is
disconnected, backlight is on whenever you
press the button.

0 : Backlight is off. 21 : Backlight is always on. Select BUTTON or ADAPTER by
using button and adjust the lighting time by using or button.

TIME
Normal: Display elapsed time.
Remain: Display remaining time.

Note: If the track format is VBR (Variable Bit Rate),

the remaining time may not be accurate.

DISPLAY

- 23 -

ds.

Advertising