IBM RELEASE 7.3 - Manual (Page 322)

11.2. Objects by SOID Window
To display this window, select Monitor from the Health and Status window, then select Lookup HPSS
Objects, and then“Objects by SOID. This window allows you to open an information window for an
HPSS object which you specify by the object's HPSS Storage Object ID (SOID). The object types
supported by this screen are Bitfiles and Virtual Volumes (Disk and Tape).
Field Descriptions
Object UUID. The UUID of the object. This must be entered in the indicated format. HPSS utility
programs that display SOIDs should present this field in the correct format.
Server UUID. The UUID of the server which manages the object. This must be entered in the indicated
format. HPSS utility programs that display SOIDs should present this field in the correct format.
Type
This is a collection of radio buttons which help to specify the type of storage object which this SOID
identifies.
Bitfile. A bitfile lookup.
Disk Virtual Volume. A lookup for a disk virtual volume will be performed.
Tape Virtual Volume. A lookup for a tape virtual volume will be performed.
Buttons
Get Info. Once all of the fields have been filled in, clicking on this button will open the information
window for the object type you selected. The Lookup Object by SOID window will remain open so that
another SOID may be specified.
Dismiss. Closes the window.
HPSS Management Guide November 2009
Release 7.3 (Revision 1.0) 322