Insignia NS-HD3113 - Manual (Page 5)

5
Insignia NS-HD3113 HD Radio Shelf System with iPod Dock
www.insignia-products.com
Back
4 HD Seek button In HD radio mode, press to seek
the next (higher frequency) HD
radio station or HD multicast
station.
5 Seek button In radio mode, press to seek the
next (higher frequency) radio
station.
6 TUNE DOWN
button
TUNE UP button In radio mode, press to tune to a
lower frequency.
In radio mode, press to tune to a
higher frequency or next HD
multicast station.
7 VOL.– button Press to decrease the volume.
8
STANDBY/ON
button
Press to turn on your shelf system
or put it in standby mode.
9 VOL.+ button Press to increase the volume.
10
STOP button
Press to stop playback.
11 Headphone jack Plug headphone into this jack.
When headphone is plugged in, no
sound comes from the speakers.
12 Remote control
sensor Point the remote control at this
sensor to control your shelf
system.
13 PRESET button In radio mode, press to select a
station preset.
14 TAG button When listening to an HD Radio
station, press to tag songs for
additional information or purchase.
15 INPUT button Press to select the play mode for
your shelf system. Choices are AM,
FM, CD, iPod
®
, or AUX.
16
PLAY/PAUSE
button
In playback mode, press to begin
playback. Press again to pause
playback. Press again to resume
playback.
17
EJECT button
Press to open or close the disc tray.
18 Disc tray Place a DVD or CD in this tray to
play it.
19 AUX input jack Plug the cable from an external
sound source into this jack.
# Component Description
# Component Description
1 Y, Pb/Cb, Pr/Cr
(component) output Connect component video cables
from these jacks to a TV or monitor.
2 L/R speaker output Connect the wires from the left and
right speakers here.
3 L/R audio output jacks Connect RCA audio cables from
these jacks to the audio L/R input
jacks on a TV or monitor.
4 Video (composite)
output Connect an RCA video cable from
this jack to the composite video
input jack on a TV or monitor.
5 Coaxial audio output Connect a coaxial audio cable from
this jack to the coaxial audio input
jack on an external audio amplifier.
6 Fiber optic audio
output Connect a fiber optic audio cable
from this jack to the fiber optic
audio input jack on an external
audio amplifier.
7 FM antenna input Connect the FM antenna here.
8 AM antenna input Connect the AM antenna here.
9 AC input Connect the AC power cord to a
power outlet.
10 Power On/Off Press to turn power to the shelf
system on or off.
4
3
2 1
9
8
7
6
5
10