Dsc address id, Dsc operation, D programming address id – Icom IM422 User Manual
Page 20
14
6
DSC OPERATION
■ DSC Address ID
A total of 100 DSC address IDs (9-digit) can be programmed
and named with up to 7 characters.
D Programming Address ID
q Push [DSC•
POS
] to enter the DSC menu.
w Push [Y] or [Z] to select “
,” push [DSC•
POS
].
e Push [Y] or [Z] to select “
,” push [DSC•
POS
].
r Push [Y] or [Z] to set the 9-digit Individual/Group ID.
• Push [CH/WX•
DUAL
] or [16•
9
] to move the cursor forward or
backward, respectively.
• Push [LO/DX
•IC
] to cancel and exit the condition.
1st digit ‘0’ is fixed for a Group ID. When you input 1st digit ‘0’
and other 8 digits, the ID is automatically registered as a
Group ID.
t After entering the 9-digit code, push [DSC•
POS
] to set up
to a 7-character ID name using [Y] or [Z].
• Push [CH/WX•
DUAL
] or [16•
9
] to move the cursor forward or
backward, respectively.
• Push [LO/DX
•IC
] to cancel and exit the condition.
y Push [DSC•
POS
] to program and exit the DSC menu.