IMC Networks iMcV-Gigabit - Manual (Page 10)

7
AutoCross Feature for Twisted Pair Connection
All twisted pair ports on the iMcV-Gigabit includes AutoCross, a feature that
automatically selects between a crossover workstation and a straight-through
connection depending on the connected device.
LED Operation
Each iMcV-Gigabit Module features diagnostic LEDs that provide information on
features and ports.
iMcV-Gigabit w/LFPT
LNK/
ACT
FDX
FXLL
TXLL
LNK
FA
Glows green when a twisted pair link is established. Blinks
green when data is detected on the port. Located on RJ-45
connector.
Glows amber when port is operating in Full-Duplex Mode
on the RJ-45 connector.
Glows green when FX LinkLoss is enabled on the port.
Blinks when a fault occurs on the fiber port and actively
disables the copper port.
Glows green when TX LinkLoss is enabled on the port.
Blinks when a fault occurs on the copper port and actively
disables the fiber port.
Glows green when a twisted pair link is established.
Glows green when FiberAlert is enabled. Blinks when a
fault occurs on the RCV fiber line and actively disables the
XMT fiber line.