Insignia NS-CNV10 - Manual (Page 13)

NS-CNV10
11 www.insignia-products.com
Connecting the power
Connecting the mounting cradle
To connect the mounting cradle:
1
Plug the USB connector on the car adapter into the
USB port on the back of the mounting cradle.
2
Plug the other end of the car adapter into the 12 V
cigarette lighter socket.
In addition to the mounting cradle, you can also charge
your GPS by plugging it into a wall outlet (with an AC
adapter), plugging it directly into your car’s cigarette
lighter socket, or by connecting it to your computer.
Caution
Disconnect the GPS from the car adapter
when you start your car to prevent damage
from a possible power surge.
Note
Make sure that your GPS and the mounting
cradle are connected correctly.
Car cigarette
lighter socket
Mounting cradle with
GPS installed
NS-CNV10 - 08-1416 - ENG.fm Page 11 Wednesday, August 27, 2008 8:07 AM