Interphase Tech CONDOR 4221 - Manual (Page 107)

Report Network Statistics
95
Report Network Statistics
Table 3-36. Report Network Statistics
The Report Network Statistics Command can be used to obtain network statistics for any Ethernet port available on
the controller. These statistics are accumulated since the last controller reset. The host may also specify a fixed
duration time interval to expire between automatic posting back of network statistics. A separate command must be
issued for each port for which statistics are desired.
This command must be submitted through the MCE to work queue 0.
Command Code
This field must contain the value 0x91 to execute the Report network statistics command.
Report Network Statistics
Offst 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
0x00 Command Code
0x01 Command Options
0x02 Return Status
0x03 Normal Completion Level Normal Completion Vector
0x04 Error Completion Level Error Completion Vector
0x05 DMA Transfer Control Word
0x06 Buffer Address (MSW)
0x07 Buffer Address (LSW)
0x08 Max Transfer Size / Actual Transfer Size
0x09 Timer Tick Interval
0x0A
to
0x11 Reserved
(18 Bytes)