IOGear GBU301 - Manual (Page 19)

16
Initial Bluetooth™ Configuration Wizard
Once Windows has finished installing the
software, the following window will appear.
This window will allow you to configure your
computer to use the service of another
Bluetooth™ Device.
If you do not have any devices you wish to
connect to at this time, click [Skip] and
proceed to step 15. If you click [Skip], wizard
will come to the end. Otherwise click [Next] to
proceed.
7. Next the wizard will search for other
Bluetooth™ devices. It will display the
Bluetooth™ devices it finds in the window.
Once it’s done searching, click on the device
you wish to connect to and click [Next].
Note: If the desired device does not appear,
click on the [Search Again] button.
8.