Ea c – InSinkErator SS-750 User Manual
Page 3
LOOSE RING (RE-USE)
MEASURE
FROM ABOVE
(INSIDE BEND)
A
C
A – Diameter (sink or bowl opening)
C – Diameter (inside bend)
Waste King, Bus Boy
5-7/8"
6-1/2"
11327H
Re-use existing clamping ring. Request
#11307 clamping ring if existing
Waste King, Bus Boy
5-7/8"
6-7/8"
11327H
clamping ring cannot be used.
Normally Used By
A
C
Special Information
ISE Ring
Adaptor No.
4
MEASURE
FROM ABOVE
(INSIDE BEND)
E
A
C
Hobart
4½"
6-7/8"
5½"
6
11327H
Discard previous
adaptor parts.
Normally Used By
A
E
No. of
Bolt Holes
C
Special
Information
ISE Ring
Adaptor#
A – Diameter (sink or bowl opening)
C – Diameter (inside bend)
E – Diameter (bolt hole circle)
5
A
C
SNAP-
RING
GROOVE
MEASURE
FROM ABOVE
(INSIDE BEND)
A – Diameter (sink or bowl opening)
C – Diameter (inside bend)
Hobart
5"
5-7/8"
11327J
Discard previous adaptor parts (clamping
ring supplied).
G.E.
6"
6-3/8"
11378E
Discard previous adaptor parts – has snap
ring groove on outside of sink throat.
Normally Used By
A
C
Special Information
ISE Ring
Adaptor No.
6
A
NO FLANGE
MOUNT
D
A – Diameter (sink or bowl opening)
D – Diameter
Red Goat, Insinger
4½"
1-1/8"
11378C
4¾" rubber connection sleeve and
clamping bands. Support legs required.
Waste King
6"
1-1/8"
11378A
6¼" rubber connection sleeve and
clamping bands. Support legs required.
Red Goat, Insinger
7"
1-1/8"
11378B
7¼" rubber connection sleeve and
clamping bands. Support legs required.
Master
8"
1"
11599K
8¼" rubber connection sleeve and
clamping bands. Support legs required.
Normally Used By
A
D
Special Information
ISE Ring
Adaptor No.
7
A
D
RAISED
BEAD
A – Diameter (sink or bowl opening)
D – Diameter
Normally Used By
A
D
Special Information
ISE Ring
Adaptor No.
8
Salvajor
4-7/16"
1"
11599N
Has raised bead on outside of sink throat.
Support legs required.
Salvajor
6-5/8"
1"
11599H