IOGear GBE211 - Manual (Page 7)

9
Introduction
Charging the Battery
You must charge the internal battery of the Bluetooth headset before your first use. There-
after, the glimmering red LED will flash when the battery is low and emit a warning sound.
To charge the battery, follow the procedure below:
1. Turn OFF the headset
2. Connect AC adapter into the power jack of the Bluetooth headset
3. The Red LED will remain ON while the headset is charging. Once the headset is fully
charged, the red LED will turn OFF. It takesabout 2 hours to fully charge the headset.
A fully-charged battery will give you approximately 7 hours of talk time, or 170 hours
stand-by time.