Iqua Snake Bluetooth Headrest Handsfree User Manual
Page 8
7
Pairing the Snake and your mobile phone
Pairing is the process of linking the Snake to your Bluetooth-enabled mobile phone. After this
process is completed, you can use the Snake with this paired mobile phone. If you want to use
the Snake with another mobile phone, you must repeat the pairing process again. Even though
Snake can be paired with up to 8 compatible phones, it can only be connected to one phone
at a time.
1.
Make sure that the Snake is charged and switched OFF.
2.
Press and hold down both the
and
button at the same time until you hear a
sound and the lights start flashing red and green.
3.
Release the buttons. The Snake is now in pairing mode and waiting for your mobile
phone to connect to it.
4.
Complete the pairing with your mobile phone. Please refer to the user guide of your
mobile phone for details on how to search and pair. When the mobile phone has found
the handsfree device, the phone will show Iqua Snake on its display. To pair with the
phone, enter the Snake PIN code 0000.
5.
Once pairing has been successfully completed, you will hear a sound and a green light
will start flashing.