IBM 27L2579 - Manual (Page 8)

3 Click on Start and move the cursor to Settings; then click on
Control Panel.
4 Double-click on Add New Hardware.
5 Click on Next.
(For Windows 98, click on Next again.)
6 Select No and click on Next.
(For Windows 98, select No again and click on Next.)
7 Click on Other devices, and click on Next.
8 Click on Have Disk....
9 Type X:\YY
10 Click on OK.
11 Select UltraBay Hot/Warm Swap Driver, and click on Next.
12 Click on Finish.
13 Restart the computer.
Installing the Display Driver (ThinkPad
600 Only)
If you are using a ThinkPad 600 computer (rather than a ThinkPad
600E computer), you need to update the display driver before
installing the DVD movie player program.
Installing the Display Driver for Windows 98
To install the ThinkPad display driver for Windows 98, do the
following:
1 Start Windows 98.
2 Click on Start.
3 Move the cursor to Settings; then click on Control Panel.
4 Double-click on the Display icon; then click on the Settings
tab.
5 Click on Advanced....
6 Click on the Adapter tab.
7 Click on Change....
The Update Device Driver Wizard starts.
8 Click on Next.
Note: X is the drive letter of the DVD drive, and YY is the country
code.
1-4