Invacare Compass XE - Manual (Page 8)

8
The Compass SPT offers a full 45˚ of tilt in front wheel configuration.
Invacare ® Compass ™ SPT Self Propelling Tilt-in-Space Wheelchair
Compass ™ SPT Specifications
Frame style Tilt
Seat width 14" - 22"
Seat depth 15" - 22"
Overall chair width 22.5"-30.5" (Seat width plus 8.50")
Overall chair length 33"-39" (without anti-tippers and front rigging)
Overall chair height range 35.5" - 39.5"
Fixed height back cane 20"
Knee-to-heel range 13.5" - 21.5"
Back angle adjustment 90˚ to 120˚ in 10˚ increments
Tubing outside diameter 1"
Tilt range 0˚ - 45˚
Weight of chair 35 lb.* / 61 lb.**
Weight capacity 250 lb.
Limited warranty Lifetime on frames and crossbraces
* 18"x18", AT902, no rear wheels, no footrests, no seat pan, no back upholstery, spreader bar, no anti-tippers,
no wheel locks, no arms.
**18"x18", AT902, 22COM/Urethane, PHW93/AT5543, seat pan, back upholstery, spreader bar, anti-tippers,
wheel locks, no arms.
Arm heights*** (range adjusts in 1" increments)
Adjustable height dual point 8.5" - 12.5" conventional only
T-arms Low range: 8" - 12"
High range: 10" - 16"
***Measurement taken from top of seat rail to top of armrest.
Available through our Specials Departments
For your customization request, please contact Customer Service for details and prices
Center pivot front riggings - swing-in
(available on FWDFS and RWDFS)
SM-031219102723
One arm drive option SM-030917114331
Invacare
®
Compass
®
SPT Self Propelling T
ilt-in-Space Wheelchair
Why the Compass ™ SPT
Traditional tilt-in-space wheelchair designs often force a choice
between meeting independent mobility or positioning needs. Wheel
access is difficult for hand propulsion and seat-to-floor limitations
inhibit foot propulsion. With the Invacare ® Compass ™ SPT Tilt-in-
Space wheelchair, you no longer need to sacrifice independent mobility
at the expense of providing stability and positioning with tilt-in-space.
Exceptional Wheel Access and Super Low Seat-to-Floor
The Compass SPT can get super low to the ground with a seat-to-floor
height starting at 13.5"* for those who foot propel. The SPT model also
provides exceptional drive wheel access through its front wheel
configuration for hand propulsion, providing the consumer with several
options of self-propulsion.
* 13.5-inch seat-to-floor height achieved using an 18" drive wheel and 5" caster.
Use special number C-030917115944 when ordering.
Versatility Beyond Belief
The versatility of the Compass SPT is remarkable. In front wheel
configuration, the consumer can be tilted 10˚ to 15˚ for postural
support while self-propelling. The SPT offers a full 45˚ of tilt at all
seat-to-floor heights for postural needs, musculo-skeletal concerns,
sitting tolerance/fatigue management, and functional requirements.
The back can be adjusted from 90˚ to 120˚ in 10˚ increments to meet
needs which may include positioning for kyphotic posture, hip range-
of-motion limitations, trunk balance, vision, or even swallowing. For
dependent mobility or caregiver needs, the Compass SPT can be
converted to a rear wheel configuration tilt-in-space wheelchair
without requiring additional parts.
Balanced and Controlled Tilt
Locating the pivot point closer to the consumer’s center-of-gravity
provides a well-balanced tilt experience, making it easier for the care-
giver and less startling for the consumer. Dual gas cylinders control the
tilt, allowing the consumer sitting in the wheelchair to feel more secure
and comfortable during the process.
Seat-To-Floor Matrix 6" Casters*
Seat-to-floor Caster Mounting Wheel Mounting
Height Position Wheel Size Position
14.5" Top 20" Top
15.5" Middle 22" Top
16.5" Bottom 24" Top
16.5" Bottom 20" Bottom
* 13.5" seat-to-floor height available with 18" composite wheel and 5" caster. Use specials number SM-060929111549.
Seat-To-Floor Matrix 8" Casters
Seat-to-floor Caster Mounting Wheel Mounting
Height Position Wheel Size Position
16.5" Top 20" Bottom
16.5" Top 24" Top
17.5" Middle 22" Bottom
18.5" Bottom 24" Bottom
Seat-To-Floor Matrix 6" x 2" Casters
Seat-to-floor Caster Mounting Wheel Mounting
Height Position Wheel Size Position
14.5" Top 22" Top
16.5" Middle 20" Bottom
16.5" Middle 24" Top
17.5" Middle 22" Bottom