IBM PROJECTOR C400 User Manual
Page 41
Item
Description
IP
Address
State
Press
the
cursor
left/right
button
to
choose
between
Static
and
DHCP
settings.
In
Static,
the
user
can
enter
IP
Address,
Subnet
Mask,
Default
Gateway,
and
DNS
Server.
In
DHCP,
the
projector
will
have
IP
Address,
Subnet
Mask,
Default
Gateway,
and
DNS
Server
set.
Note:
The
default
setting
is
DHCP.
IP
Address
Press
the
cursor
up/down
button
to
change
the
IP
Address.
Note:
The
IP
address
can
only
be
changed
when
the
IP
Address
State
is
Static.
Subnet
Mask
Press
the
cursor
up/down
button
to
change
the
Subnet
Mask.
Note:
The
Subnet
Mask
can
only
be
changed
when
the
IP
Address
State
is
Static.
Default
Gateway
Press
the
cursor
up/down
button
to
change
the
Default
Gateway.
Note:
The
Default
Gateway
can
only
be
changed
when
the
IP
Address
State
is
Static.
DNS
Server
Press
the
cursor
up/down
button
to
change
the
DNS
Server
address.
Note:
The
DNS
Server
can
only
be
changed
when
the
IP
Address
State
is
Static.
Apply
Settings
Select
this
to
save
and
apply
the
settings.
Chapter
5.
On-Screen
Display
menu
controls
5-9