Invacare 1048920 User Manual
Page 2
6. Repeat STEPS 2‐5 for the other back cane, ensuring that the back height selected
in STEP 5 is the same for both back canes.
7. Secure the back upholstery to the new back canes with the existing mounting
screws and washers (Detail “A”).
FIGURE 1 Replacing Back Canes
Mounting
Screws
Locknuts
Wheelchair
Frame
Back Cane
Spacers
DETAIL “C”
DETAIL “A”
19 inches High
Locknuts
Mounting
Screws
Wheelchair
Frame
18 inches High
17 inches High
16 inches High
15 inches High
Wheelchairs
manufactured
before 11/01/05)
Wheelchairs
manufactured
after 11/01/05
Wheelchair
Frame
Back Cane
NOTE: The spacers
must be on the
outside of the
wheelchair in order
for the mounting
screws to be properly
tightened.
Back Canes
Back Upholstery
Mounting Screws
Washer
Washer
DETAIL “B”
Invacare Corporation
www.invacare.com
USA
One Invacare Way
Elyria, Ohio USA
44036-2125
800-333-6900
Canada
570 Matheson Blvd. E Unit 8
Mississauga Ontario
L4Z 4G4 Canada
800-668-5324
Invacare, the Medallion Design, and
Yes, you can. are registered
trademarks of Invacare Corporation.
©2005 Invacare Corporation
Part No 1046525
Rev C - 12/6/05
MADE IN MEXICO