Server menu options – Intel SX220 User Manual
Page 119
Viglen SX220 User Guide
118
Server Menu Options
Discover
You can discover multiple servers in a single step and add them to the server tree.
Servers are discovered using a Ping Sweep mechanism supported on servers
running TCP/IP.
To discover a range of servers with IP addresses, do the following steps:
1.
On the Button Bar, click the Server->Discover menu selection.
2.
Enter the starting address and ending address to be discovered. The starting
address will default to the network subnet of the console machine starting at
address 0. The ending range will default to the value 255, indicating that ISC will
search the entire network subnet. If you change the default address value, enter
the full IP address. Wild card characters are not allowed. For all IP addresses,
the range of values allowed for any IP address segment is between 0 and 255.
3.
Click <OK>.
The ISC Console will ping each server and test each server for all ISC-registered
tools. If one or more of the tools is found, then the server will be added to the server
tree.
During the discovery process, the status bar indicates ping status, the number of
servers found, and the number of servers not responding.
Information on servers discovered by ISC is maintained across machine boots.
When the ISC Console is run, servers discovered during previous sessions are
displayed. You do not have to run discovery every time the ISC Console is launched.
If any of the tools supported by the ISC Console are installed or removed from any
managed server, the ISC Console discovery process will need to be rerun to update
the tool list for that server.
Add
You can manually add a server with an IP address to the ISC Console server tree.
To add a server with an IP address, do the following steps:
1.
On the Button Bar, click the Server > Add menu selection.
2.
Choose a radio button for the IP label.
3.
Enter the full address of the desired server. Wild card characters are not allowed.
For all IP addresses, the range of values allowed for any IP address segment is
between 0 and 255.