IBM B50 - Manual (Page 89)

After determining which adapter to use to ping the remote system, you must provide
the addresses needed to communicate with the remote system. Select the
appropriate device from the Ping menu to display a screen similar to the following:
Ping
1. Client IP Address [129.132.4.2 ]
2. Server IP Address [129.132.4.1 ]
3. Gateway IP Address [129.132.4.3 ]
4. Subnet Mask [255.255.255. ]
.---------. .------.
|E=Execute| |X=Exit|
---------' ------'
===>
Change SCSI ID
This option allows you to view and change the addresses of the SCSI controllers
attached to you server.
Update System Firmware
This option allows you to update your system firmware. Note that you must insert a
diskette containing the firmware update image after you see a confirmation screen.
To create a firmware diskette with the latest level of firmware available, see the
following Web site:
http://www.rs6 .ibm.com/support/micro
When you are prompted, insert the firmware update diskette containing the new
firmware image.
Chapter 3. Using System Management Services 3-37