IBM SUREMARK 1ND - Manual (Page 6)

A new world standard for retail receipt printers
IBM SureMark Printer at a glance
Models 1NR
Receipt station (one-color paper)
Receipt station (two-color paper)
Printing resolution (thermal)
Data buffer RAM
Flash memory for microcode
Flash memory for offline journal
Flash memory for logos
Flash memory for fixed messages
Flash memory for code pages
Flash memory for user characters
Interfaces
Ports
CRU (customer replaceable units) with Light-Path management
Sensors
Mounting options
Support for wide range of receipt media—thickness/type of media 6
Media type supported/roll diameter
Energy consumption efficiency*
80 lps @ 8 lpi, 60 lps @ 6 lpi
35 lps @ 8 lpi, 26 lps @ 6 lpi
203 dpi
Dynamic/expandable
5 MB
Up to 3 MB
Up to 3 MB
Up to 3 MB
Up to 3 MB
64 KB
RS232 – 115 kbps (external power brick or special power cable
required)
RS485 – 187 kbps (24 or 38 Volt)
USB 2.0 – 12 Mbps (Full Speed – Bulk and HID) Powered USB plus
Standard USB
● DC In (except RS485)
● USB/Powered USB or RS232 or RS485 (24 or 38 V) (Interface card
dependent)
● OEM Cash Drawer (+24 V)
n/a
Paper low, paper out, cutter health, print head health, usage counters,
paper motion jam detection
Integrated (Integration tray), Distributed (free standing), Wall mount
1.6 - 3.7 mil (thousandths of an inch) paper thickness. Factory feature
selection of 2.28 in (58 mm) or 3.15 in (80 mm) paper width
Receipt paper rolls – maximum 4 in (102 mm) diameter. External roll
(mounted under counter) maximum roll diameter – 12 in (305 mm)
N/A
“Green” attributes Shipping container and inserts are made of recycled materials and are
stackable and recyclable