IronKey Secure Flash Drive Enterprise - Manual (Page 11)

PAGE 0 IRONKEY ENTERPRISE USER GUIDE
USINg THE IRONKEY UNLOCKER ON WINDOWS
The IronKey Unlocker allows you to securely access your files on multiple operating systems.
It prompts you for your password, securely validates it, and then mounts your secure volume
where all of your files are stored on the IronKey.
Here is how to unlock your IronKey on Windows 2000 (SP4), XP (SP2), and Vista:
Step Description
 Plug in your IronKey and unlock
it with your password.
When you plug your IronKey in, the “Unlock Your Iron-
Key” window appears (if it does not, you can go to “My
Computer” and double-click on the IronKey drive).
Entering your password correctly will mount your se-
cure volume with all your secure applications and files.
Entering the wrong password too many times will
permanently erase all of your data. After every three
attempts, you must unplug and reinsert the IronKey.
NOTE: Some operations require that your IronKey
connect to the Internet before unlocking. If it cannot
connect, click on “Edit Proxy Settings...” to configure
how your IronKey connects to the Internet.
 Choose which action to take
when you unlock it. By selecting the corresponding checkboxes before
unlocking your IronKey, you can view your secure files,
launch the IronKey Control Panel, unlock your Iron-
Key in Read-Only Mode, and/or securely log into your
my.ironkey.com account.
USINg THE IRONKEY UNLOCKER ON A MAC (10.4+)
Step Description
 Plug in your IronKey and unlock
it with your password.
When you plug in your IronKey, go to “IronKey:Mac:IK
Unlocker” and double-click on the IronKey drive.
Entering your password correctly (which is verified
in hardware) will mount your secure volume with all
your secure files.
Entering the wrong password too many times will
permanently erase all of your data. After every three
attempts, you must unplug and reinsert the IronKey.