Infinite Peripherals DVX Plus II/III/IV - Manual (Page 11)

6 Camp-On
Making an Unscreened Transfer
1. Briefly depress and release the hookswitch.
2. Dial desired intercom number.
3. Hang up to complete transfer.
PBX/Centrex Transfer
While connected to a PBX or Centrex CO Line:
1. Briefly depress and release the hookswitch. An
intercom dial tone is heard.
2. Dial [660]. A Flash command is presented to the PBX or
Centrex CO Line and a stutter tone is heard.
3. Dial desired telephone number.
4. Replace handset to complete transfer.
Calling Station Tone Mode
Allows a calling station to override a called key station’s “H” or
“P” intercom switch settings.
When placing a call to a key station and tone ringing is desired:
1. Dial [6#].
2. Dial three-digit station extension (call tone rings
station).
Camp-On
Placing a Camp-On
After receiving an intercom busy tone:
1. Briefly depress and release the hookswitch.
2. Dial [620]. When the called line is alerted, they can
choose to pick-up your call, or remain on original call.