Trouble shooting – iHome iP40 User Manual

Page 12

Advertising
background image

Trouble Shooting

9

Symptom

Possible Problem Solution

Unit does not

respond (no power)

AC adaptor isn’t plugged to a wall outlet or the

connector is not plugged into the power supply

jack on the back of the unit

Plug the AC adaptor into a wall outlet and plug the connector

into the supply jack on the unit

Wall outlet is not functioning

Plug another device into the same outlet to confirm the outlet is

working. If outlet is controlled by a switch, try moving switch.

iPhone/iPod does not

dock properly

Using no or wrong iPhone/iPod insert

Make sure the dock insert is the proper fit to your iPhone/iPod

iPhone/iPod isn’t docked properly

Remove your iPhone/iPod from the dock and check for

obstruction on the connectors in the dock and on your

iPhone/iPod. Then reseat it in the dock.

iPhone/iPod isn’t docked properly

Remove your iPhone/iPod from the dock and check for

obstruction on the connectors in the dock and on your

iPhone/iPod. Then reseat it in the dock.

iPhone/iPod does

not respond to the

unit

Your iPhone/iPod software is too old

Upgrade software on your iPhone/iPod via iTunes.

iPhone/iPod is locked up

Please make sure your iPhone/iPod is working properly before dock

into the unit. Please refer to your iPhone/iPod manual for detail.

iP40 cannot control those iPods or other devices.

Using 1st or 2nd generation iPod, iPod

shuffle or other devices.

iPhone/iPod is not docked properly

Remove your iPhone/iPod from the dock and check for

obstruction on the connectors in the dock and on your

iPhone/iPod. Then reseat it in the dock.

iPhone/iPod didn’t

charge up

iPhone/iPod is locked up/frozen

iPhone/iPod battery has problem

Please make sure your iPhone/iPod is working properly before

dock into the unit. Please refer to your iPhone/iPod manual for

detail.

Volume level is set too high

Decrease the volume. Turn off EXB effect

Sound source is distorted

If original sound source file is poor quality, distortion and noise

are easily noticed with high-power speakers. Try a different audio

source such as a music CD through the aux jack.

If you are using an iPod Shuffle or external sound source like

older generation iPod, try reducing the output volume on the

device itself. Also, try turning the iPod bass boost OFF.

Sound is distorted

Advertising