Intermec 751G - Manual (Page 103)

Chapter 3 — Configuring the Computer
751G Color Mobile Computer User’s Manual 89
SetAuthenticationMode()
Call this function to set the desired authentication mode.
SetChannel()
This function is currently not implemented. Ad-hoc networks
automatically select a channel or use the already existing channel.
Syntax UINT SetAuthenticationMode( ULONG );
Parameters NDIS_RADIO_AUTH_MODE_OPEN 802.11b/g Open Authentication. Indicates that the
radio is using an open system.
NDIS_RADIO_AUTH_MODE_SHARED 802.11b/g Shared Authentication. Indicates that the
radio is using a shared key.
NDIS_RADIO_AUTH_MODE_AUTO Auto switch between Open/Shared. Indicates
automatic detection is used when available.
NDIS_RADIO_AUTH_MODE_ERROR Defined as error value. Indicates the authentication
mode was not determined at this time or is
unknown.
NDIS_RADIO_AUTH_MODE_WPA WPA Authentication
NDIS_RADIO_AUTH_MODE_WPA_PSK WPA Preshared Key Authentication
NDIS_RADIO_AUTH_MODE_WPA_NONE WPA None
Return Values ERROR_SUCCESS when successful, ERR_QUERY_FAILED when the query failed, or
ERR_CONNECT_FAILED if a connection with the radio failed.
Remarks None.
Definitions #ifdef DYNAMIC_LOADING
typedef UINT (*PFN_SetAuthenticationMode)(ULONG);
#else
UINT SetAuthenticationMode(ULONG);
#endif
Syntax UINT SetChannel( USHORT );
Parameters USHORT value that should populate with the desired channel (1-14).
Return Values None.
Remarks None.
Definitions #ifdef DYNAMIC_LOADING
typedef UINT (*PFN_SetChannel)(USHORT);
#else
UINT SetChannel(USHORT);
#endif