InFocus INTEGRATION LP840 - Manual (Page 36)

34
Advanced settings
Sharpness : (video sources only) changes the clarity of the edges of a video
image. Select a sharpness setting.
Color Space : This option applies to computer and component video
sources. It allows you to select a color space that has been specifically tuned
for the input signal. When Auto is selected, the projector automatically
determines the standard. To choose a different setting, turn off Auto, then
choose RGB for computer sources, choose either SMPTE240, REC709 or
REC601 for component video sources.
Color Temperature : changes the intensity of the colors. Select a listed
value, or select User and individually adjust the intensity of the red, green,
and blue colors.
Video Standard : when set to Auto, the projector attempts to automatically
pick the video standard based on the input signal it receives. (The video
standard options may vary depending on your region of the world.) If the
projector is unable to detect the correct standard, the colors may not look
right or the image may appear “torn.” If this happens, manually select a
video standard by selecting NTSC, PAL, or SECAM from the Video Stan-
dard menu.
Overscan : (video sources only) removes noise around the video image.
The following 4 options are for computer sources only.
Phase : adjusts the horizontal phase of a computer source.
Tracking : adjusts the vertical scan of a computer source.
Horizontal / Vertical Position : adjusts the position of a computer source.
Sharpness
Color Space
Color Temperature
Video Standard
LP840-850-860 User's Guide-02.fm Page 34 Friday, February 25, 2005 12:58 PM