IBM Partner Pavilion TrackPoint - Manual (Page 10)

Connecting the Keyboard to an IBM
ThinkPad Computer
Note: Completely turn off your ThinkPad notebook computer before
connecting or disconnecting the keyboard. If the ThinkPad notebook
computer is suspended when you connect or disconnect the keyboard,
your system might not install the correct TrackPoint device driver
when the system returns to full power.
The following information shows how to set up the TrackPoint
keyboard and the optional mouse for your IBM ThinkPad notebook
computer.
Connecting the Keyboard to a Docking Station or Port
Replicator
If you are connecting the keyboard to your ThinkPad’s docking station
or port replicator, connect the keyboard using the following steps:
1. Turn off your computer and all attached devices.
2. Disconnect any keyboard or mouse now attached to the computer.
3. Look at the two connectors at the end of the keyboard cable.
One connector shows a symbol of a keyboard 1 and one shows
a symbol of a mouse 2 .
1-4 TrackPoint Keyboard User’s Guide