Impex PL 200 User Manual
Pl-200, Marcy magnetic upright bike, Model pl 200
Advertising
Table of contents
Document Outline
- BEFORE YOU BEGIN...................................................................................…. 1
- IMPORTANT SAFETY NOTICES..................................................................…. 2
- HARDWARE PACK……….....…....................................................................…. 3
- ASSEMBLY INSTRUCTIONS........................................................................…. 4
- EXPLODED DIAGRAM………………………………………………………………. 10
- PARTS LIST...................................................................................................…. 11 COMPUTER................................................................................................…… 12
- WARRANTY.................................................................................................…. 14
- ORDERING PARTS.......................................................................................… 14
- Part# Description Identifier
-
-
-
-
- ASSEMBLY INSTRUCTION
- A.) Insert the Handlebar (#7) halfway through the opening on the back of the Handlebar Post (#4). Adjust the position of the handlebar. Secure it with a L-shape Handlebar Adjustment Knob (#5) and Ø 5/8” Washer (#6).
- Attach the Seat (#8) to the top of the Seat Post (#10). Secure it with three Ø 5/16” Washers (#11), Ø 5/16” Spring Washers (#12), and M8 Nylon Nuts (#13).
- Insert the Seat Post into the top opening on Main Frame (#15). Adjust the height of the Seat. Lock the Seat Post with a Seat Post Lock Knob (#16).
- A.) Thread the Left Pedal (#27) counterclockwise onto the left Crank (#14). Thread the Right Pedal (#28) Clockwise onto the Crank on the other side.
- EXPLODED DIAGRAM
- ASSEMBLY INSTRUCTION
-
-
-
-