IBM EGX-400 - Manual (Page 66)

62 Chapter 4 - Performing Cutting Using a Computer
4-3. Installation and Overview of the Included Software
Software Included with the Machine
The included Roland Software Package CD-ROM contains the following programs. Install and set them up as required.
This document does not explain how to use these programs. For information about program operation, refer to other
documentation such as the manuals in electronic format found on the CD-ROM.
☞ See p.4 "Documentation Included with the Machine"
Installation and Setup
System Requirements
Operating system
Computer
Drive
Monitor
Memory (RAM)
Free hard-disk space
required for installation
Interface
Windows 95/98/Me/NT4.0/2000/XP
Computer running Windows (Pentium processor or better recommended)
CD-ROM drive
Windows-compatible monitor capable of displaying 256 colors or more
32 MB or more recommended
32 MB
Printer port or COM port
This program is for flat engraving of nameplates and the like. It can use any TrueType fonts
registered with Windows. It also comes with its own stroke fonts. You can even import
images and engrave items such as logos. There is even a feature that lets you import data
from a list of names and engrave nameplates one after another.
This program is for designing and engraving reliefs (raised engravings). This lets you easily
add thickness to text, shapes, and imported images, and create three-dimensional reliefs.
This program is for freely cutting three-dimensional shapes. You cannot perform designing
using this program alone. MODELA 3D Design and MODELA 3D Text are included.
This is a Windows-based driver required for sending data from a computer to the machine.
Be sure to install it when you are using any of the programs just described.
This program is for performing simulations before you actually carry out cutting using 3D
Engrave or MODELA Player. It lets you verify the finished results for shapes, the time
required for cutting, and other factors. This can help reduce loss in terms of material and
time.
Dr.Engrave
3D Engrave
MODELA Player
2.5D driver
Virtual MODELA