Intellinet Network Solutions 509961 - Manual (Page 3)

3
Features & Benefits :
„ 32-bit high performance Ethernet card.
„ Support Plug & Play function.
„ Using turbo drivers to enhance transfer rate.
„ Support multi-card drivers in Plug & Play mode.
„ Configuration by software or mainboard‘s BIOS.
„ Plug and play, auto-setup IRQ and I/O address.
„ Support one PCI 10/100Mbps LAN card, and 4 TP
ports .
„ Compliance with IEEE 802.3 CSMA/CD, 100Base
TX and 10Base-T standard, Full-duplex data
transfer rate.
„ Supports Netware ODI & IPX, NDIS Driver for LAN
Manager, Microsoft Windows for Workgroups,
Microsoft NT, WIN 95/98/2000, SCO UNIX driver
and Packet Driver for TCP/IP.
„ Provides diagnostic software and LEDs for any port
to indicate network activity.
„ Supports smart remote boot ROM.
Hardware Installation
To insert a card into your computer, do the following:
1.Turn off the computer and remove its cover.
2.Insert the Hub card into a PCI slot which is assigned
slave
or auto mode by the BIOS. If needed, refer to your
PCI