Iiyama E1902S - Manual (Page 17)

ENGLISH
BEFORE YOU OPERATE THE MONITOR 12
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite B1902S
For optimal viewing it is recommended to look at the
full face of the monitor, then adjust the monitor's
Height and angle to your own preference.
Hold the stand so that the monitor does not topple
when you change the monitor’s angle.
you are able to adjust the monitor's height up to
110mm,angle up to 35degrees right and left,25
degrees upward,5 degrees downward.
NOTE Do not touch the LCD screen when you
change the angle. It may cause damage or
break the LCD screen.
Careful attention is required not to catch
your fingers or hands when you change
the angle.
PANEL ROTATION : ProLite B1902S
A Ajust the monitor's height to the maximum.
B Rotate the panel 90 degrees.
Portrait: Turn clockwise.
Landscape: Turn counter clockwise.
Attempting to rotate without fully
extending upward may cause
damage to stand.
Screen Rotation should be
accessed via the softOSM
software.
C Ajust the monitor's angle to your preference.
NOTE
110mm