iSymphony M2 - Manual (Page 32)

User Manual M2
32
OSD Info & Playback Controls
The OSD can also provide you other information and control during playback.
Status during playback
To access the OSD during playback
• Press DISPLAY on the remote.
Most CD, JPEG and VCD discs can display OSD information while they are playing. Depending on
the disc type, repeatedly pressing DISPLAY will show all or some of the following:
Playing a specific chapter, track, time
While a disc is playing:
1) Press the DISPLAY button to display the OSD menu.
2) Press the GOTO/CARD button on the remote control.
3) Use the number buttons (0~10+ ) to enter your selection
4) Press the ENTER button to confirm and begin playback at that point.
SINGLE ELAPSED SINGLE REMAIN TOTAL ELAPSED TOTAL REMAIN OFF.
Programming a Playlist
This feature allows you use the OSD to program your favorite titles, chapters, or tracks and play
them in a determined order. You can program up to 99 selections into memory.
1) With a disc inserted in the player, press the STOP button.
2) Press the PROG button to enter programming mode. PROGRAM appears on the OSD.
3) Use the number buttons (0~10+) enter the track number of the first track you wish to program.
4) Use the number buttons to enter the next track in your playlist.
5) Continue entering track numbers until your playlist is complete.
6) Press ENTER to start playback.
7) To clear the playlist press CLEAR.
Note:
• If you are programming a playlist for MP3, WMA or JPEG files, the track number is the file number
shown to the right of the file name.
• For CD playlists, no OSD information is displayed.