Ikelite SX10 IS - Manual

2
3
SX1 - Back View
[E] +/- Exposure/Jump
[F] AF Frame/Single Erase
[G] Manual Focus
[H] Macro [I] FUNC./SET
[J] ISO
[K] Control Dial
[L] Cont. Shoot [A] Print/Share
[B] Aspect Ratio
[C] Movie
[D] Playback
B
F
D
E
J
G
H I
L
M
H
A
TTL Connector
N
K
[M] Display
[N] Menu
Flash
Button
C
4
PPlleeaassee RReeaadd
We suggest that you read this instruction booklet thoroughly
before use. If you are new to underwater photography, be sure
to read the General and Photo Tips sections.
We also suggest that you read your camera manual thoroughly
to have a full understanding of each camera function.
IInniittiiaall CCaam meerraa SSeettuupp
1. Set ISO to 80.
2. Set camera mode dial to “A” Aperture priority.
3. Set Flash Mode to “Auto” (lightning bolt in LCD).
4. When using external strobes, set built-in flash to “Off”.
5. For General photography, set aperture to f4.0.
6. For Macro photography, set aperture to f8.0.
7. Set White Balance to “Auto”.
8. Set Image Size to “L”.
9. Set Metering to “Center-Weighted Avg.”.
SX1, SX10, SX20 - Front View
Lid
Snap
Mode Dial Power Button Flash Pop-Up
Control
Shutter
Button
Zoom
Lever
Lid
Snap
Lens
Port
Internal
Housing
Flash
Deflector
Congratulations on your purchase of an Ikelite Digital Camera
Housing. Ikelite has over 45 years of experience in the underwater
photographic and lighting market. Our products are designed and
built in the USA by Ikelite for both the professional and amateur
photographer.
The clear housing permits instant visual inspection of the camera
and all sealing surfaces as well as complete monitoring of controls
and camera LCD screens.
Ikelite Digital Housings are slightly negative in salt water for
stability. This housing has been water pressure tested at the
factory to 200’ (60m).
Ikelite Digital Housing
i n s t r u c t i o n m a n u a l
# #66114488 ffoorr CCaannoonn SSXX11 IISS
# #66114488..0011 ffoorr CCaannoonn SSXX1100 IISS,, SSXX2200 IISS