IBM 802.11g Wireless Broadband Router WRT-410 - Manual (Page 14)

- 9 -
Administrator: Type the password the Administrator will use to login to the system. The password must
be typed again for confirmation.
User: Users can type a password to be used for logging in to the system. The password must be typed
again for confirmation.
3.1.4 Time
This screen enables you to set the time and date for the router's real time clock, select your time zone,
specify an NTP server, and enable or disable daylight saving.
Local Time: Displays the local time and date.
Time Zone: Select your time zone from the pull-down list.
Default NTP Server: Type the NTP server IP address in the field to enable the WRT-410 to
automatically synchronize the time with Internet NTP server.
Set the Time: Select the date and time from the pull-down lists, and click “Set Time” to set the
WRT-410's internal clock to the correct date and time.
Daylight Saving: Enables you to enable or disable daylight saving time. When enabled, select the start
and end date for daylight saving time.