Ingersoll-Rand PM10X-X-X-A02 - Manual (Page 7)

Page 7 of 8 PM10X-XXX-XXX-A02 (en)
PARTS LIST / PM10X-XXX-XXX-A02 AIR SECTION
168 k
. ASSEMBLY TORQUE REQUIREMENTS ,
NOTE: DO NOT OVERTIGHTEN FASTENERS.
ALL FASTENERS ARE METRIC.
PM10A-X and PM10S-X: Torque (105 and 134) screws to 40 - 50 in. lbs (4.5 - 5.6 Nm).
PM10R-X: Torque (134) screw and (236) nut to 35 - 40 in. lbs (4.0 - 4.5 Nm).
LUBRICATION / SEALANTS
k Apply Lubriplate FML-2 grease to “O” rings, “U” Cups & mating parts.
- Apply PTFE tape to threads at assembly.
U Apply anti-seize compound to threads at assembly.
U
. 134
135
133
174 k
121
118
173 k
169 k
172 k
171 k
170
167
121
k 174
118
166 k
132
k
141
k
140
200
k
233
176
k
PILOT VALVE
PART GROUP
MAJOR
VALVE
A replacement Major Valve Service Assembly is available separately, which includes the following:
637395-1 for models PM10R-X: 105 (4), 107 (2), 111, 132, 135, 136, 137, 138, 139, 140, 141, 166,
176 (2), 200, 233 and 236 (4).
637395-3 for models PM10A-X: 105 (4), 111, 128, 132, 135, 136, 137, 138, 139, 140, 141, 166,
176 (2), 200 and 233.
637395-5 for models PM10S-X: 105 (4), 111, 128, 132, 135, 136, 137, 138, 139, 140, 141, 166,
176 (2), 200 and 233.
Figure 3
101 181 103 201
173
k
136
- 128
U
. 105
U
. 134
135
133
136
107
U 105
107
. 236
Models PM10A-X
PM10S-X
Models PM10R-X
MATERIAL CODE
[A] = Aluminum
[AO] = Alumina Oxide
[B] = Nitrile
[Br] = Brass
[C] = Carbon Steel
[D] = Acetal
[P] = Polypropylene
[Sp] = Santoprene
[SS] = Stainless Steel
[U] = Polyurethane
[Z] = Zinc
k 137
k 139
k 138
111
k 137
k 139
111
k 138
Insert screwdriver here to remove (233) adapter plate.
Insert screwdriver here to remove (233) adapter plate.
Notch
43