IMC Networks Wireless Outdoor Bridge XI-1500-IH - Manual (Page 4)

Hardware Installation
Take the following steps to set up the Wireless Outdoor Bridge.
Hardware equipment
Fixation
First you should fix the Wireless Outdoor Bridge, the following figure show it:
Connect the Ethernet Cable
The Wireless Outdoor Bridge supports 10/100M Ethernet connection. Attach UTP Ethernet
cable to the RJ-45 connector on the Wireless Outdoor Bridge. Then connect the other end of the
RJ-45 cable to a hub or a station. Please note that, use the crossover cable when you desire to
connect the Wireless Outdoor Bridge to a PC.
Put UTP cable through the water-joint
Make the crystal head (not cross-over cable):
white orange
orange white green blue white blue green white brown brown
4