Invacare A-6 - Manual (Page 53)

Spoke Rear Wheels (w/ Handrims)
(Before 9/2/11)
When ordering a Spoke Wheel with Handrim attached, the standard rim mounting
process uses the outside holes of the handrim mounting tabs. To use the inside holes
to reduce the overall width of the chair, you must order the wheel and handrim
assembled as a special order.
Wheel Style
8 Oblique
Projection
Tire Type
Anodized
Aluminum
Grey
Plastic Coated
Black
Plastic Coated
8 Vertical
Projection
N/A N/A N/A 1049553-NLA
1115634
Umma Gumma 700SP
See Note(s) B
A - As of 7/15/02 Spinergy Wheels now have 18 spokes instead of 30. For chairs built Before 7/15/02, it is recommended when one
wheel is requested that the wheels be replaced in pairs.
B - As of 11/8/02 these wheels now have a Black finish. For chairs built Before 11/8/02, it is recommended when one wheel is
requested that the wheels be replaced in pairs.
C - As of 11/17/08 Spinergy Wheels changed from black spoke, black hub to a black spoke, silver hub appearance. For chairs built
Before 11/17/08, it is recommended when one wheel is requested that the wheels be replaced in pairs. NOTE:
When ordering a Spoke Wheel with Handrim attached, the standard rim mounting process uses the outside holes of the handrim mounting
tabs. To use the inside holes to reduce the overall width of the chair, you must order the wheel and handrim assembled as a special order.
52
To order call toll free 1-800-333-6900, or www.invacare.com
Form No. 00-131