Virtual wall lighthouses – iRobot 500 User Manual

Page 8

Advertising
background image

1

iRobot Roomba 500 Series

www.irobot.com

15

Virtual Wall Lighthouses

(models 535 and above)

Lighthouse Mode

In Lighthouse mode, the Virtual Wall Lighthouse helps Roomba navigate
around your home and allows Roomba to clean room-to-room.

Place lighthouses in the doorway between two rooms. Roomba will clean the
room it starts in, navigate to the next room, and then clean the second room.
When Roomba has completed cleaning, it will use the lighthouses to navigate
back to the home base.

With two Virtual Wall

Lighthouses in lighthouse

mode, Roomba will clean

Room 1 for approximately

35 minutes, then clean

Rooms 2 and 3 for 35

minutes each, and then

return to the Home Base.

Home

Base

Lighthouse

Room 1

Room 2

Room 3

Lighthouse

Place lighthouses

in the center of

the door frame

Virtual Wall Lighthouses

(models 535 and above)

Virtual Wall Mode

In Virtual Wall mode, the Lighthouse creates an invisible barrier that
Roomba will not cross.

Use the slider bar to adjust the length of the barrier. A higher range will drain
the battery faster.

In Virtual Wall mode, the Lighthouse blocks an area ranging from zero to eight
feet long. A small halo prevents Roomba from bumping into the Lighthouse
and a larger cone-shaped area blocks off areas of your home where you don’t
want Roomba to go.

Additional Virtual Wall Lighthouses may be purchased at www.irobot.com.

Virtual Wall Lighthouses are compatible with models 535 and above.

Distance

0-3’

4-7’

8’+

0-1.5m

1.5-3m

3m+

Range

Setector

TIP: Use Virtual Wall Lighthouses in Virtual Wall mode to block doorways or to
keep Roomba out of off-limit areas.

Start

Roomba

here

TIP: In Virtual Wall mode, iRobot recommends setting up the Virtual Wall
Lighthouse behind the door jam as shown on pg. 12.

Advertising