Insignia IS-PA040719 - Manual (Page 6)

RANDOM PLAY
Enables all of the tracks on a disc to be played in a random sequence.
1. Press the MODE/ST/MONO button until “RDM”
text appears and flashes on the display while playing
tracks on the disc.
2. The “RDM” text will stop flashing and the
random function will begin once the PLAY button
is pressed.
Press the MODE/ST/MONO button until RDM dis-
appears from the display.
SEARCH FUNCTION
Locating a Particular track
Locating a Particular Point in a track
To search backward at high speed Press and hold the SKIP DOWN
button
To search forward at high speed Press and hold the SKIP UP button
Low level audio will still be heard during the search process to assist in
locating the correct point in the track.
To go back to the beginning of the
current or a previous track Press the SKIP DOWN button
lightly and repeatedly.
To go to beginning of any following
track Press the SKIP UP button lightly
once for next track or repeated for
desired track.
USING ANTI-SHOCK AND SKIP FREE PROTECTION FEATURE
Note the “ ” indicator appears on display as being empty when the player
is first activated. it immediately begins to store sound data in memory
bank, The indicator appears to be “ ” when the data buffer is full.
When the laser loses tracking due to mechanical shock, the data stream into
the memory is interrupted but the data output from the memory buffer
continues. The sound is not interrupted. As the data is read from the memory,
the indicator changes from “ ” to “ ” .
Once the laser locks again on the CD track, the data stream is fed to the
memory and joined to the previous data (see indicator changes) at higher
speed.
CAUTION
If the unit is subject to excessive and continuous repeated shocks, it will
cause the sound to skip. Also note the “ ” indicator will appear empty.
NOTES
" " " " "
When the “ANTI-SHOCK” is operating, the battery consumption is higher
because the disc rotates faster than normal and also the memory circuitry
is activated.
" " " " "
When the digital anti-shock function is switched “ON” or “OFF”, the sound
will be interrupted. This is normal.
" " " " "
Remember that conditions such as dirty, scratched or warped discs may
cause skipping or noise thereby affecting performance of the “ANTI-
SHOCK” system.
" " " " "
Skip Free Anti-Shock protection greatly reduces or eliminates skipping during
many active uses.
10 11