Ikelite Canon HG-10 - Manual

IIKKEELLIITTEE VVIID DEEO O CCAASSEE
SSU UPPPPLLEEM MEEN NTTAALL IIN NSSTTRRU UCCTTIIO ON NSS FFO ORR
# #66008800 CCaannoonn H HGG--1100
This supplemental set of instructions describes additional features specific
to your housing model. Prior to testing the system in the water, please read this
supplement along with the general instruction manual to become familiar with
its features and functions.
Ikelite Video Cases are slightly negative
in salt water for stability. This housing has
been water pressure tested at the factory
and has a working depth of 60m (200').
H HO OU USSIIN NGG CCO ON NTTRRO OLLSS ____________________________________
• Power On/Off / Mode
• Start/Stop
• Power Zoom
• Photo Button
• Auto / Manual Focus Lock
• Control Dial
• Type / Card Switch
• Auto / P-Mode
• Joy Stick #1
• Joy Stick #2 / Function
• Quick Start / Disp.
M MAAIIN N O O--RRIIN NGG # #00110099________________________________
O-rings last several years if properly
maintained. Control seals should not need
to be replaced as long as the control shafts
are kept clean and lightly lubricated.
Tape/
Card
Joy Stick #2/
Function
#6080 Canon HV-6-10
Base
Bottom Bar
Eyeport
Rec./
S.S.
Zoom
Photo
Button
Joy Stick #1
Control Dial
Auto / P-Mode
Port
Quick Start / Disp.
Power
Mirror
Lid Snap
P P RR EE PP AA RR AA TT II O O N N
PPAACCKKAAGGEED D W WIITTH H H HO OU USSIIN NGG ____________________________________________________________________________________________________
• External UR/Pro Color Filter
• Internal Lens Shade
• Silicone Lubricant
CCO OLLO ORR FFIILLTTEERR __________________________________________________________________________
The installation and usage of the external UR/Pro
color filter is described in the general instruction manual.
LLEEN NSS SSH HAAD DEE ______________________________________________________________________________
The internal lens shade helps block light reflection/
refraction caused by the interaction of the external color
filter and the port.
Carefully thread the lens shade on the front of the
camera lens. The lens threads are very fine; D DO O N NO OTT cross thread. It should screw on
very easily. If it is difficult to turn, you are cross threading.
Completely thread the lens shade into the camera to avoid any potential
clearance or sealing problems when the camera is installed and the housing is sealed.
SSU UPPEERR--EEYYEE VVIIEEW WFFIIN ND DEERR __________________________________________________________________________________________________________
See exactly what the camera sees underwater using the camera's electronic
viewfinder in conjunction with the Ikelite Super-Eye, which is permanently mounted
in the eyeport on the clear back plate. The Super-Eye extends the viewfinder image
to provide enhanced viewing underwater.
LLCCD D M MO ON NIITTO ORR // EEXXTTEERRN NAALL M MIIRRRRO ORR __________________________________________________________________________________
The camera's LCD monitor can be viewed from the rear of the housing, using the
external mirror featured on the side of the housing.
Open the LCD monitor on the camera, rotate 180°, and then press it back against
the side of the camera. The external mirror is hinged so that it can be opened to reflect
the image from the camera's LCD monitor for viewing from the rear of the housing. The
LCD image will appear opposite, left to right.
During transportation, please remember to close the mirror by pressing it against
the side of the housing.
BBAATTTTEERRYY AAN ND D TTAAPPEE ____________________________________________________________________________________________________________________
Install a fully charged Sony battery on the camera:
Canon NB-2LH, BP-2L13, BP-2L14, BP-2L 24H
Other brand batteries may not fit inside the housing.
Make sure you have loaded an appropriate digital cassette tape in the camera.
External
Color Filter
Internal
Lens Shade