Abs curved back without mounting hardware – Invacare 2GTR User Manual
Page 48
ABS Curved Back without Mounting Hardware
Recline Only (2GR) and Tilt/Recline (2GTR) with V.S.R.
NOTE: CURV Metal Backs will only attach to Round Back Canes only. Hardware to attach to the Key
Slotted Extruded Back Canes is not available.
NOTE: Wheelchairs with serial number dated for 2005 and after, call a Customer Service Parts Specialist
for additional information on ordering a warranty ABS Back Pan replacement.
NOTE: Overall back height is calculated by measuring from the seat pan surface to the top of the back
pan. Back pan material height can be calculated by subtracting 4-3/4" from the overall back height listed.
Material height listed is rounded off to the nearest whole number.
NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested.
This will allow the Loop Fastener Adhesive on the Back Cover to attach properly.
Item
Number
Part Number
Description
Note
Quantity Per
Package Assembly
See Chart
#1 Back Pan (16" - 19" W)
1
1
1
See Chart
#1 Back Pan (20" - 22" W)
1
1
1
See Chart
#2 Back Cushion Assembly (16" - 19" W)
1
1
2
See Chart
#2 Back Cushion Assembly (20" - 22" W)
1
1
2
See Chart
#3 Back Assembly w/o Hardware (16" - 19" W)
1
1
3
See Chart
#3 Back Assembly w/o Hardware (20" - 22" W)
1
1
3
1125723
Kit, Hook Fastener w/ Adhesive Back
1
1
A
A - Not Shown. Hook Fastener Adhesive Kit is used to attach the Back Cover to the Back Pan and must be ordered when a
new Back Pan or Back Assembly is requested.
NOTE:
47
To order call toll free 1-800-333-6900, or www.invacare.com
Form No. 03-026