Insignia User Guide - Manual (Page 11)

11
Insignia NS-LTDVD19-09 19” LCD TV/DVD Combo
www.insignia-products.com
4 Press INPUT, then press / to select
Component.
Connecting a digital audio input
You can connect your TV audio out to a digital
amplifier.
To connect to an amplifier equipped with a
digital audio input:
•
Plug a coaxial cable (2) into the amplifier (3)
and into the COAXIAL OUTPUT jack on the
back of your TV (1).
Connecting a computer
To connect a computer using VGA:
1 Plug a VGA cable (3) into the VGA port on
the computer (5) and into the VGA INPUT
port on the back of your TV (1).
2 Plug an audio cable (4) into the audio jack on
the computer (5) and into the AUDIO VGA
INPUT port on the back of your TV (1).
3 Turn on your TV.
4 Press INPUT, then press / to select PC.
To connect to a computer or other HDMI
device using the HDMI jack:
5 Plug an HDMI cable (2) into the HDMI port on
the HDMI device (6) and into the HDMI
INPUT port on the back of your TV (1).
6 Turn on your TV.
7 Press INPUT, then press / to select
HDMI.
1
A C I N P U T ~ 100-240V 50/60Hz
3
2
Caution
The TV will automatically turn off after one minute
if there is no signal in PC mode.
1
A C I N P U T ~ 100-240V 50/60Hz
2
AUDIO VGA INPUT HDMI INPUT
3
6
4
5