Insignia NS-MDDVD10 - Manual (Page 10)

10
Insignia NS-MDDVD10 Dual-Screen Portable DVD Player
www.insignia-products.com
To connect a television to the DVD player:
1 Move the AV In/DVD switch to DVD.
2 Connect plugs from the one end of the audio/
video cable (included) to the Video and
Audio In/Out jacks on the left side of the
DVD player:
• Connect the yellow plug to the jack
nearest the Headphone jack.
• Connect the red plug to the center jack.
• Connect the white plug to the outside
jack.
3 Connect the plugs from the other end of the
audio/video cable to the jacks on the TV:
• Connect the yellow plug to the video in
jack.
• Connect the red plug to the right audio in
jack.
• Connect the white plug to the left audio in
jack.
4 To watch a DVD on the TV:
• Turn on the DVD player and slide the AV
In/DVD switch to DVD.
• Turn on the TV and follow instructions
provided by the television manufacturer to
play the DVD.
Note:
If your TV does not have audio/video inputs, you will need to
purchase an RF modulator (sold separately) and follow the
instructions included with it to connect the unit to your TV.
Connecting a stereo receiver or amplifier
to the DVD player
You can connect a stereo receiver or an amplifier
to the main unit of the DVD player using the
audio/video cable.
This unit can play Dolby Digital, but only in two
channels.
To connect a stereo receiver or amplifier to
the DVD player:
1 Move the AV In/DVD switch to DVD.
2 Connect plugs from the one end of the audio/
video cable (included) to the Video and
Audio In/Out jacks on the left side of the
DVD player:
• Connect the yellow plug to the jack
nearest the Headphone jack.
• Connect the red plug to the center jack.
• Connect the white plug to the outside
jack.
3 Connect the plugs from the other end of the
audio/video cable to the jacks on the stereo
receiver or amplifier:
• Connect the red plug to the right audio in
jack.
• Connect the white plug to the left audio in
jack.
• The yellow plug does not need to be
connected.
Connecting the monitor and DVD player to
other equipment
You can play a DVD in the main unit and use a
game system or other video equipment with the
monitor at the same time.
To connect the monitor and DVD player to
other equipment:
1 Connect the built-in DIN cable from the
bottom of the monitor to the Main Unit port
on the right side of the main unit.
2 Connect the plugs from the one end of the
audio/video cable (included) to the Video
and Audio In jacks on the monitor:
• Connect the yellow plug to the outside
jack.
• Connect the white plug to the center jack.
• Connect the red plug to the jack nearest
the built-in DIN cable.
3 Connect the plugs from the other end of the
audio/video cable to the jacks on the game
console or other video equipment:
• Connect the red plug to the right audio out
jack.
• Connect the white plug to the left audio
out jack.
• Connect the yellow plug to the video out
jack.
Audio/Video cable (included)
Game console or
other video equipment
Right side of main unit
Left side of
main unit
Bottom of monitor