Intel IWILL P4D-N - Manual (Page 26)

P4D/P4D-N Motherboard
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
User’s Manual 2•12
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
CD-In & AUX Audio Connectors J69 & J70
Function: Connectors for audio-in cables from internal
peripherals.
Description: The two audio-in connectors on the
motherboard are for audio cables from optical drives such
as a CD-ROM or DVD-ROM drive or a modem/telephony
device. The connectors provide an audio input connec-
tion between a device and the integrated audio subsystem.
More Information: Please see the Connecting internal
peripherals section in Chapter 5.
IR Connector J45
Function: Connector for an Infrared (IR) port module.
Description: The IR connector supports both IrDA and
ASKIR infrared port modules. Follow the module’s in-
structions to install it.
More Information: Please see the Integrated Peripherals
section of “Configuring the CMOS Setup Utility” in Chap-
ter 5 for information.:
Audio-In Connectors:
The J69 CD-In connector
is for CD-ROM or other op-
tical drives. Use the J70
AUX connector for an ad-
ditional drive or a modem/
telephony device.
J69 CD-In audio-in connector
J70 AUX audio-in connector
IR connector J45
IR Connector J45:
The IR connector is for
both IrDA and ASKIR port
modules. You must use the
CMOS Setup Utility to con-
figure the board to use the
IR feature.
J45