Intel IWILL P4D-N - Manual (Page 85)

5: System Configuration
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
User’s Manual 5•27
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Install the first two items for the Intel Chipset in sequence
by clicking on them and following the install program
instructions.
Next install the “Onboard Audio Driver” in the same way.
Finally, review the “Lan Driver Installation Guide” for
the OS you have installed by clicking on “Onboard Lan
Driver” and install the appropriate LAN driver for the OS
you are using.
The Adobe Acrobat reader install program will run when
you try to view the Lan Driver Installation Guide if you
have not already installed it. Install the program and then
repeat the procedure to read the guide information.
The Make Driver Utility
The “Make Driver” utility makes driver floppy disks.
There aren’t any disks you need for this board in the
program list, so you don’t need to use this program.
Making & Installing Linux Drivers
You can boot the system from the Power Installer disc.
The system will boot from the Linux kernel on the disc
and you can use the disk creator that loads to create
Linux support disks. You can then use these to install
any necessary modules according to your Linux
distribution’s instructions for module installation.