Using the remote control, Power source, Ac connection – Insignia NS-B2113 User Manual

Page 8

Advertising
background image

8

Insignia NS-B2113 iPod® Dock with FM Stereo Radio

www.insignia-products.com

Using the remote control

When there is an obstacle between the unit and the
transmitter, the transmitter may not operate.

When direct sunlight, an incandescent lamp, fluorescent lamp
or any other strong light shines on the remote sensor of the
unit, the remote operation may be unstable.

Power Source

AC Connection

To connect the AC adapter:

1 Insert the small end of the AC adapter into the power in jack

(located on the rear of the unit).

2 Connect the AC cord to the adapter and connect the other end to

a wall outlet.

Notes:

• Only use the supplied AC adapter which has the following specs: DC12V 2A
• Unplug both the DC plug and the adapter from the wall outlet when not in use.
• The batteries are automatically disconnected when the AC adapter is used.

AC outlet

AC adapter

to DC 12V IN jack

NS-B2113.fm Page 8 Thursday, February 1, 2007 10:13 PM

Advertising