Listening to music – iRiver IDP-100 User Manual

Page 8

Advertising
background image

LISTENING TO MUSIC

To play

Press the /EJECT button.

To select the music

: To select the previous music
: To select the next music

To adjust the volume

VOL : To increase volume
VOL : To decrease volume

To pause playback

Press the

/EJECT button. If pressed

again, the file starts from the paused
point. Approximately 1 minute later after
playback has been paused, the player
turns off to reduce battery consumption.

You can change the pause off time by
option.

To search the music

/

: Hold pressed /

buttons to search fast reverse or advance
the music.

To select the Equalizer.

Press the EQ button repeatedly for

the desired mode and watch the display.
The EQ pattern changes with each press
of the button as shown below.

NORMAL

CLASSIC

JAZZ

ROCK

ULTRA BASS

USER EQ

To get to Stand By Mode

Press and hold the EQ/STAND BY

button. (about 1sec)

To change the media

Press and hold the

/EJECT button.

EJECT indicator on the LCD displays and
then NO Media appeared.

13

LISTENING TO MUSIC

Connect the earphones as below.

You can record and play on both sides of the media. Insert the media in the
compartment with the side to be played or recorded facing down.

Turn the power of the player on as below.

Insert the media in the media compartment.

12

To protect the player
from pollutants, the

anti-dust cover is necessary. When
you eject media from the player,
open the anti-dust cover first!!

Advertising