Insignia NS-DPF8PR - Manual (Page 45)

43 www.insigniaproducts.com
Remote control does
not work. • Be sure to remove the plastic tab from the
remote control's battery compartment
before using the remote control for the
first time.
• The battery is dead. Replace with a
CR2025 battery, then pair with the frame
as described below.
• The remote control is not correctly paired
with the frame. From the Home menu,
select the Setup menu, then select
Factory Settings . Select RF Learn
Mode , then select Yes. Follow the
on-screen instructions to pair your remote
with your frame.
Problem Solution
NS-DPF8PR-DPF10PR_09-0561_MAN_ENG_V1.fm Page 43 Wednesday, July 22, 2009 3:50 PM