iRiver IFP-900 - Manual (Page 22)

Basic operation
Recording from an external audio source
Recording from an external audio source
4-18
Recording from an external audio source
Basic operation
Preparing Recording from an external audio source
4-17
Press and hold the MODE/REC button. The current function appears on the LCD screen.
Press the NAVI/MENU button to the or direction to select Line In mode.
Press the NAVI/MENU button (or PLAY/STOP) to enter recording standby mode.
1 1
2 2
Long Click
Click
Push
Connect the LINE OUT jack of the external equipment to the LINE IN jack of the player.
1 1
Push and hold the NAVI/MENU button to enter to Setup Menu. Select “Control” by pushing
the NAVI/MENU button toward
or direction.
2 2
Adjust Line-in Recording Mode, Line-in Recording Volume, Line-in Auto-Sync and Line-
in/External Mic on Control Menu.
Refer to page 5-24/5-25 for details. 3 3
Begin playback on the external device and then press the MODE/REC button on the iriver
player to begin recoding.
3 3
Click
To record from an external microphone, change the "Record Type" in the Settings menu.
(Refer to page 5-24/5-25)
Note