Impex MWB 214 - Manual (Page 7)

STEP 2 (See Diagram 2)
A.) Attach the Front Support (#5) to Main Seat Support (#3). Secure it with one M8 x 1 5/8”
Carriage Bolt (#28), one Ø 5/8” Washer (#26), and one M8 Aircraft Nut (#24).
Do not
tighten the Nut and Bolt until instructed to do so.
B.) Attach the other end of Main Seat Support to the Cross Brace (#2). Secure it with four
M8 x 2 3/8” Hex Bolts (#18), one Bracket (#10), four Ø 5/8” Washers (#26), and four M8
Aircraft Nuts (#24).
C.) Attach the Diagonal Support (#4) to the Main Seat Support. Secure it with one M8 x 1
¾” Carriage Bolt (#29), one Ø 5/8” Washer (#26), and one M8 Aircraft Nut (#24).
D.) Attach the other end of Diagonal Support to the Front Support. Secure it with one M8 x
3/5” Hex Bolt (#38) and one Ø 5/8” Washer (#26).
E.)
Securely tighten all Nuts and Bolts.
DIAGRAM 2
6