B.1 installing pc/104 modules, Appendix b installing pc/104 modules – IBM CFC2 User Manual
Page 124
PCI-6871 Users’ Manual
116
Appendix B Installing PC/104 Modules
B.1 Installing PC/104 Modules
The PCI-6871's PC/104 connectors give you the flexibility to attach PC/
104 modules.
Installing these modules on the PCI-6871 is quick and simple. The fol-
lowing steps show how to mount the PC/104 modules:
1.
Remove the PCI-6871 from your system, paying particular atten-
tion to the safety instructions already mentioned above.
2.
Make any jumper or link changes required to the CPU card now.
Once the PC/104 module is mounted, you may have difficulty in
accessing these.
3.
Normal PC/104 modules have male connectors and mount directly
onto the main card. (Refer to the diagram on the following page.)
4.
Mount the PC/104 module onto the CPU card by pressing the mod-
ule firmly but carefully onto the mounting connectors.
5.
Secure the PC/104 module onto the CPU card using the four
mounting spacers and screws.